OS 10 surface protection system
MC-Floor TopSpeed flex plus

Our OS 10 surface protection system with MC-Floor TopSpeed flex plus encompasses a flexible waterproofing layer with very high crack-bridging capability (dynamic, class IV T+V, at -20 °C, per TL/TP BEL-B3) and very high mechanical resilience. It boasts very good cleanability to EN 11998, short overworking times and rapid curing to final strength, and is totally resistant to UV and yellowing.

OS 10 surface protection system <br/>MC-Floor TopSpeed flex plus
No. System Build-Up Product Consumption
1 Primer MC-Floor TopSpeed SC approx. 300 g/m²
2 Scratch coat MC-Floor TopSpeed SC + quartz sand 0.1–0.3 mm + thixotropic agent MC-Stellmittel TX 19 (1–3 %) approx. 600 g/m² + approx. 600 g/m²
3 Waterproofing layer MC-Floor TopSpeed flex plus + thixotropic agent MC-Stellmittel TX 19 (1–3 %) 2 x approx. 500 g/m²
4 Dry-shake layer MC-Floor TopSpeed + thixotropic agent MC-Stellmittel TX 19 (1–3 %) approx. 400 g/m²
Dry shake Quartz sand in excess
5 Top seal coat MC-Floor TopSpeed approx. 500 g/m²

Brochures

More
abs 123 abs 123 abs 123 abs 123 abs 123 abs 123 abs 123